Friday, December 11, 2009

ISO 14001 and The Environment

The ISO 14000 family of International Standards on environmental management is a relative newcomer to ISO’s portfolio – but enviroment-related standardization is far from being a new departure for ISO.

In fact, ISO has two-pronged approach to meeting the needs of business, industry, governments, non-governmental organizations and consumers in the field of the environment.

On the one hand, it offers a wideranging portfolio of standardized sampling, testing and analytical methods to deal with specific environmental challenges. It has developed more than 350 International Standards (out of a total more
than 12000) for the monitoring of such aspects as the quality of air, water and soil. These standards are means of providing business and government with scientifically valid data on the environmental effects of economic activity.

They also serve in a number of countries as the technical basis for environmental regulations.

ISO is leading a strategic approach by developing environmental management systemstandards that can be implemented in any type of organization in either public or private sectors (companies, administration, public utilities). To spearhead this strategic approach, ISO establish a new technical commitee, ISO /TC 207, Environmental management, in

1993. This followed ISO’s successful pioneering experience in management system standardization with the ISO 9000 series for quality management.

ISO’s direct involvement in environmental management stemmed from an intensive consultation process, carried out within the framework of a Strategic Advisory Group on Environment (SAGE),set up in 1991, in which 20 countrie, 11 international organizations and more than 100 environmental experts participated in defining the basic requirements of a new approach to environment-related standards.

This pioneering work was consolidated with ISO’s commitment to support the objective of “sustainable development” dicussed at the United Nations Conference on Environment and Development in Rio de Janeiro in 1992.

Today, delegations of business and government experts from 55 countries have participate actively within TC 207,

and another 16 countries have observer status. These delegations are chosen by the national standars institute concerned and they are required to bring to TC 207 a national consensus on issue being addressed by the commitee.

This national consensus is derived from a process of consultation with interested parties.

From its beginning, it was recognized that ISO/TC 207 should have close cooperation with ISO/TC 176, Quality management and quality assurance, in the areas of management systems, auditing and related terminology. Active efforts are under way to ensure compatibility of ISO environmental management and quality management standards, for the benefit of all organizations wishing to implement them.


Records required by ISO 9001:2008

Clause Record required
5.6.1 Management reviews
6.2.2 e) Education, training, skills and experience
7.1 d) Evidence that the realization processes and resulting product fulfil requirements
7.2.2 Results of the review of requirements related to the product and actions arising from the review
7.3.2 Design and development inputs relating to product requirements
7.3.4 Results of design and development reviews and any necessary actions
7.3.5 Results of design and development verification and any necessary actions
7.3.6 Results of design and development validation and any necessary actions
7.3.7 Results of the review of design and development changes and any necessary actions
7.4.1 Results of supplier evaluations and any necessary actions arising from the evaluations
7.5.2 d) As required by the organization to demonstrate the validation of processes where the resulting output cannot be verified by subsequent monitoring or measurement
7.5.3 The unique identification of the product, where traceability is a requirement
7.5.4 Customer property that is lost, damaged or otherwise found to be unsuitable for use
7.6 a) Basis used for calibration or verification of measuring equipment where no international or national measurement standards exist
7.6 Validity of the previous measuring results when the measuring equipment is found not to conform to requirements
7.6 Results of calibration and verification of measuring equipment
8.2.2 Internal audit results and follow-up actions
8.2.4 Indication of the person(s) authorizing release of product.
8.3 Nature of the product nonconformities and any subsequent actions taken, including concessions obtained
8.5.2 e) Results of corrective action
8.5.3 d) Results of preventive action


The History Of ISO 14001 Environmental Management System

The History Establishment Of ISO 14001 Environmental Management System

Environmental management began in earnest around 1970 as a direct result of environmental catastrophes and governmental reaction to those catastrophes. In many countries, environmental regulations that focus on control of environmentally damaging emissions to air, discharges to water, and disposal of hazardous wastes were instituted in an effort to prevent future environmental catastrophes and to limit toxic releases to the environment. Regulations, however, too often had the effect of placing a ceiling on environmental performance. Many industrial organizations, reacting negatively to governmental environmental regulations that
they view as being based on bad science, adding unnecessary costs, or making them uncompetitive in international markets, have restricted their environmental management efforts to complying with regulations and nothing morIn response, global institutions, recognizing the interconnected problems of persistent environmental degradation, growing economic divisions, and associated poverty and hunger, developed programs to begin to bring economic and social goals into balance with ecological and natural resource preservation. In 1992, the Global Environmental Summit, convened in Rio de Janeiro by the United Nations, brought representatives of 178 nations together to endorse Agenda 21: The Program of Action for Sustainable Development. Agenda 21 details the actions that are necessary on the part of organizations of all kinds if sustainability is to be achieved and collapse of economic, environmental, and social systems is to be avoided.
A second global summit, the World Summit on Sustainable Development (WSSD), was held in Johannesburg in Summer 2002. In tabulating the results since the Rio summit, the WSSD determined that all environmental trends had experienced further degradation and that the only sustainability gains to be reported were progress against infectious diseases, the global literacy rate, and the greater inclusion of women in society’s activities. The significance of Rio is that it marks the time when much of the world realized that we cannot continue on the same path we have been on. The significance of Johannesburg is the realization that, in spite of enormous effort on the part of many institutions, humankind is losing the battle for sustainability.
ISO 14001 is the EMS Specification developed by the international Organization for Standardization (ISO) of Geneva, Switzerland as a part of the ISO 14000 series ofenvironmental management documents. It was issued as both an International and American National Standard in September 1996. The Second Edition of ISO 14001, ISO 14001:2004, was issued as an International Standard on November 15, 2004 and subsequently as an American National Standard.
ISO 14001 establishes a framework for the conduct of environmental management by requiring the organization to define an Environmental Policy and establish sixteen management procedures that support the policy. Many of the ISO 14001 procedures already exist in some form within organizations and only require modification to meet the requirements of ISO 14001. Other procedures have to be added in their entirety. All of the ISO 14001 procedures represent best management practices as defined by a consensus of the representatives of more than 50 national standards bodies and Non-Governmental Organizations (NGOs) who participated in the development of ISO 14001:1996 from early 1993 through July 1, 1995 and in
the development of the Second Edition from early 2002 until mid-2004.


DOE Policy on ISO 14001

An early approach on ISO 14001 was to require DOE contractors to develop an ISO 14000-like EMS through a DOE-wide Order. Some contractors did not like the implication of the draft Order would ‘require’ a ‘voluntary’ standard. Although some viewed the draft Order as broad and flexible, the Order was never finalized. Likewise, largely due to a change of administration,DOE was not able to establish a formal Policy regarding ISO 14001.

The current approach within DOE is to encourage voluntary implementation of an environmental management system as an integrated component of the contractually-required Integrated Safety Management System (62 FR 34841).4 Further, DOE encourages implementation of an environmental management system where it makes good business sense for the individual site. The voluntary approach is supported by the White House Office of Science and Technology Policy,5 and the integrated approach has been recognized as acceptable by EPA.6 DOE is also actively involved with the standard both at DOE sites and through an Interagency Working Group on ISO 14000. In addition, many DOE contractors are implementing ISO 14001 where it makes business sense for their individual site. Implementation is seen in a variety of ways from full third-party certification to implementation of various aspects of the standard.

Environmental Aspects (ISO 14001:2004, §4.3.1)

A single manufacturing facility has potentially hundreds of environmental aspects. How far must it go in identifying its environmental aspects to satisfy the terms of the requirement? ISO 14001 specifies that the organization is to identify those aspects that it can control and those that it can influence and that it must also take into account planned or new developments and new or modified activities, products, and services. These stipulations in the requirements, without actually drawing boundaries on how far the organization must go in identifyingenvironmental aspects, at least establish some categories of aspect that must be considered. Beyond this principle, each organization must identify its aspects comprehensively enough so as to not fail to identify a significant aspect or a legal requirement. An objection to comprehensive identification of aspects is that the organization may become so immersed in aspects identification that it loses sight of the end objective of the procedure, which is to determine significance.

“Significant impact” is not a stand-alone term in §4.3.1. It is accompanied by the phrase “impact on the environment” and “environment” is a defined term. Significant aspects, then, are those environmental aspects that have or can have significant impacts on air, water, land, natural resources, flora, fauna, and humans. The organization determines, using its own criteria, what magnitude of impact on these seven environmental receptors constitutes a significant impact. Whether an aspect is regulated is not intended to be a factor in determining significance.

Proper execution of the environmental aspects procedure is important, in part, because it lifts environmental management out of the regulatory compliance mode and into the mode ofsystematically consequences for the environment, irrespective of regulation. The organization that rigorously applies the environmental aspects procedure discovers many opportunities to improve environmental performance that regulation does not address, including:· Use of energy

· Consumption of materials

· Environmental impacts of employee activities

· Environmental impacts of products and by-products post-manufacture, including distribution, use, reuse, and disposal

· Environmental impacts of services

· Unregulated waste streams such as carbon dioxide

identifying environmental aspects and impacts and considering their

INTEGRATING THE NATURAL STEP ELEMENTS INTO ENVIRONMENTAL MANAGEMENT SYSTEMS

Robert convened a group of over 100 Swedish scientists and asked them to develop a vision for a sustainable society based on the scientific principles. The Natural Step framework (Robert, 1991) was the result of this effort and is becoming widely recognized.

In this framework, there are four underlying principles or conditions and four guiding objectives.

These system conditions are:

Nature should not be subject to systematically increasing concentrations of substances extracted from the Earth’s crust;

Nature should not be subject to increasing concentrations of substances produced by society;

Nature should not be subject to systematically increasing degradation by physical means; and

People should not be subject to conditions that systematically undermine their capacity to meet their needs.

These conditions can be converted to four objectives that are more easily understood:

Eliminate our community’s contribution to fossil fuel dependency and to the wasteful use of scarce metals and minerals;

Eliminate our community’s contribution to dependency upon persistent chemicals and the wasteful use of synthetic substances;

Eliminate our community’s contribution to encroachment upon nature; and Meet human needs fairly and efficiently.

To apply The Natural Step, Boisvert et al. (1999) recommend an A-B-C-D approach: Awareness, Baseline Analysis, Compelling Vision, and Down to Action. Kent County chose to align its program with The Natural Step because of its simplicity and scientific basis.

An environmental management system (EMS) is a set of processes and practices that enable an organization to reduce the environmental impacts from its operations and increase efficiency. It helps the organization to systematically manage its environmental “footprint.” Alternatively, according to the ISO definition (ISO, 2004) an EMS is “a part of an organization’s management system used to develop and implement its environmental policy and manage its environmental aspects.” It is built upon the concept of continuous improvement and follows a four element Plan-Do-Check-Act cycle. The EMS is an evolving process and is consistently modified to accommodate new information, changing circumstances and changes in organization priorities.

The critical components of each of the four elements are:

Planning, includes identifying environmental aspects and establishing goals [Plan];

Implementing, includes training and operational controls [Do];

Checking, includes monitoring and corrective action [Check]; and

Reviewing, includes progress reviews and acting to make needed changes to the EMS [Act].

There are a variety of reasons that an organization may develop and implement an EMS. The reasons are many and varied and often depend upon the type of organization. A business with international offices has different reasons than a public agency to develop and implement an EMS. Table 1 provides a list of the most common of these reasons.

Some disadvantages to developing and implementing an EMS relate to the costs associated with development of the program and include:

An investment of internal resources, including staff/employee time;

Costs for training of personnel;

Costs associated with hiring consulting assistance, if needed; and

Costs for technical resources to analyze environmental impacts and improvement options, if needed.

Critical factors that assure the success of any management system include:

Commitment from senior management;

Designated staff including a Core team to act as a cheerleader and a representative trained in the program;

Involvement of all employees in the covered fenceline;

Dedicated resources;

A link to the overall strategic planning of the organization;

Sufficient time to develop and implement the program;

Proper follow through on the checking and acting components; and

A willingness to make the cultural shift required for the program to succeed.

The ISO 14001 guidance lists 17 elements, shown in Table 2, as the foundation of an EMS.

Several documents and publications cover the various elements of an EMS in detail. One of these is the US EPA publication “Achieving Environmental Excellence: An Environmental Management Systems (EMS) Handbook for Wastewater Utilities,”

Tuesday, December 8, 2009

Operational Control In ISO 14001 Standards

Operational Control In ISO 14001 Standards
Operational Controls over Significant Environmental Aspect Activities, ?4.4.6.a&b – ISO 14001 requires the organization to identify and plan the operations associated with its identified significant environmental aspects in order to establish documented operational control procedures that preclude deviation from the Environmental Policy or not achieving objectives and targets.
Opportunities to apply operational controls can be found by reviewing operations. As shown in the accompanying text box, once the operations that can produce significant impacts are identified, it is a relatively simple step to establish operational control procedures that are consistent with the aims of the Environmental Policy and the objectives and targets and that stipulate operating criteria.
Significant Environmental Aspects of Goods and Services, §4.4.6.c – This requirement of ISO 14001 requires careful reading. Here is a parsed interpretation of the Operational Control requirement as it relates to goods and services furnished by others:
“The organization shall identify those operations that are associated with [its] identified significant environmental aspects… The organization shall plan these operations in order to ensure that they are carried out under specified conditions by… [1] establishing and maintaining procedures related to the identifiable significant environmental aspects of goods and services used by the organization and [2] communicating relevant procedures and requirements to suppliers and contractors.”
An easy way to conform to this requirement is to:
1. Identify the operations associated with the significant environmental aspects;
2. Identify the environmental aspects of goods and services furnished by others;
3. Determine how these aspects contribute to the organization’s significant aspect operations;
4. Establish appropriate/relevant requirements for the providers of these services; and
5. Communicate the requirements to suppliers and contractors.
Confusion in conforming to this requirement can arise because it is easy to read sub-clause c) independently of the first sentence of §4.4.6.
This first sentence gives context to the rest of the section in that it requires that we first “identify those operations… associated with the identified significant environmental aspects.” Once we have identified these operations, we look to the significant aspects of goods and services supplied by others and assess their contribution to the potential environmental impact. The accompanying example is offered to help clarify the intent of the requirement.